Cooper Bussmann BU-905U-L Guía de instalación descargar pdf (Pagina 42)

www.cooperbussmann.com/BussmannWirelessResources

Cooper Bussmann BU-905U-L Wireless I/O Configuration Manual

Setting the Unit Secondary Address

The BU-905U-L-T supports a secondary address that lets you re-use the same unit address for multiple transmit-only units.

This is useful if your network has a large number of transmit-only units.

To reuse the same address:

NOTE: To use the same address you must have an existing BU-905U-L-T unit.

1. Create a new BU-905U-L-T.

2. BU-Config checks if you want to manually set the address:

3. Click Yes to manually set the address. If you click No BU-Config will select an unused address for the new unit, or if you click Cancel the new

module will not be created.

4. Select an address already used by a transmit-only unit that you want to reuse and click OK to set the address. If you click Cancel

BU-Config will return to the previous screen without creating a new unit:

5. BU-Config automatically assigns the secondary unit address to a different number:

6. Click OK to acknowledge the message.

7. You have created a unit with a new secondary address.

3A1579Rev1.4

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 79 80

Sin comentarios

Cooper Bussmann BU-905U-L Guía de instalación Pagina 42