Cooper Bussmann 5073E-T Manual de usuario descargar pdf (Pagina 43)

www.cooperbussmann.com/wirelessresources

Cooper Bussmann 5073E-T Managed Ethernet Switch User Manual

43Rev Version 1.1

Figure 42 DHCP Server Configuration

DHCP Server Enable or disable the DHCP server function on the switch. When enabled,

the switch will be the DHCP server on your local network.

Start IP Address Enter the IP address that is the beginning of the dynamic IPaddress range.

For example, if the dynamic IP address is between 192.168.1.100 and

192.168.1.200, the start IP address would be 192.168.1.100.

End IP Address Enter the IP address that is the end of the dynamic IP address range.

For example, if the dynamic IP address is between 192.168.1.100 and

192.168.1.200, the end IP address would be 192.168.1.200.

Subnet Mask Enter the subnet mask of the IP configuration.

Gateway Enter the IP address of the gateway in your network.

DNS Enter the domain name server IP address in your network.

Lease Time (Hour) Enter the number of hours after which the client will reset the dynamic IP

address.

Apply Click to apply the settings.

DHCP Server Client Table

When the DHCP server function is enabled, the system will collect the DHCP client information including the

assigned IP address, the MAC address of the client device, the IP assigning type, status, and lease time.

To view the DHCP server client table, choose System-->DHCP Server-->Client Table.

Figure 43 Client Table

DHCP Server IP Binding

You can specify (bind) an IPaddress for each port. When the device connects to the port and requests an IP

address, the system will assign the IP address that is bound with the port.

To configure IP address binding, choose System-->DHCP Server-->IP Binding.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 105 106

Sin comentarios

Cooper Bussmann 5073E-T Manual de usuario Pagina 43